1
Add to Quote

Explore our collections and click on “Add to Quote.” To proceed, you will need to create an account and submit your business documents for verification.

2
Confirmation & Payment

Shop from Monday to Saturday, and you can expect the Quotation withiN 24 hours. Once everything is confirmed, you can conveniently make your payment online. Please note that the quotation is only valid for 2 DAYS.

3
Next-Day Dispatch

Your order will be promptly shipped from either our Manila or Pangasinan warehouse, depending on which location offers you the best savings on shipping costs.

DAVCO DUSTLESS PREMIUM TILE ADHESIVE

Davco Dustless Premium Tile Adhesive, a premium grade, thick or thin bed, fast-setting, grey cement-based tile adhesive specifically formulated to provide higher coverage, easier application, longer open time and extra high bond strength. It has superior water resistance and low shrinkage capability.

Dustless* Premium Tile Adhesive for all types of tiles
with Davco Dustless* technology

 

Packaging: 25kg Bag

 

Coverage Guide
• Using a 6mm x 6mm notched trowel approximately 6 – 7 sqm per 25kg bag
• Using a 10mm x 10mm notched trowel approximately 5 – 6 sqm per 25kg bag

 

Uses / Area of Application

– Walls/floors, interior/exterior application
– Concrete, cement renders / screeds, block work, rendered brickwork and mortar leveling
– Smooth and even lightweight concrete block or thick bed application to level uneven parts
– Waterproofing membranes and immersed areas especially swimming pools

 

Types of Tiles: Suitable for porous and non-porous tiles i.e glass mosaics, glazed glass ceramics, granite, slate and natural stones.

In stock

Quantity:

SKU: ed78d61f3165 Categories: , ,
  • Instructions

    Mixing and Application

    Add one 25kg bag of DAVCO DUSTLESS PREMIUM TILE ADHESIVE to approximately 5 to 6 liters of clean water, mixing continuously until a lump-free, creamy consistency is achieved.

    Allow the mix to stand for 5 – 10 minutes; remix then use the adhesive. Spread the adhesive onto the substrate using either a 6mm x 6mm notched trowel for wall tilling, or 10mm x 10mm notched trowel for floor tiling. The choice of trowel should be determined by the size of the tiles, depth of knobs, grooves or ridges on the back of the tile and evenness of the substrate.
    • A 6mm x 6mm notched trowel is recommended for mosaic tiles.
    • Thicker bed of adhesive allow for better contact to the substrate as well as picking up unevenness especially in the case of slates.
    • For tiles with deep grooves or ridges, such as slate or lugged backed tiles, the adhesive should be butter coated onto the back of the tiles in addition to being notched-trowelled onto the substrate.
    • Do not spread more than 1 square meter of adhesive at a time. Ensure that the adhesive is wet when the tiles are laid and tapped into position to ensure positive contact with the adhesive.
    • Ensure that there are no voids under the tiles.
    • Install tiles within the duration of the open time.
    • Do not disturb or walk on tiles until they are laid for 24 hours

  • Packaging Dimensions

    45cm x 30cm x 10cm

You may also like