1
Add to Quote

Explore our collections and click on “Add to Quote.” To proceed, you will need to create an account and submit your business documents for verification.

2
Confirmation & Payment

Shop from Monday to Saturday, and you can expect the Quotation withiN 24 hours. Once everything is confirmed, you can conveniently make your payment online. Please note that the quotation is only valid for 2 DAYS.

3
Next-Day Dispatch

Your order will be promptly shipped from either our Manila or Pangasinan warehouse, depending on which location offers you the best savings on shipping costs.

DAVCO STANDARD TILE ADHESIVE (also SIKA TILE ADHESIVE)

Davco Standard Tile Adhesive (also Sika Tile Adhesive) is an economical thick or thin bed (TTB) cement based tile adhesive. Ideal for laying the following tile types: ceramic tiles, baked clay tiles, quarry and most monocottura tiles unto interior and exterior walls and floors.

Economical Tile Adhesive

 

Packaging: 25kg bag

 

Coverage guide:
– Using a 4mm x 4mm notched trowel approx. 2.5kg/m2
– Using a 6mm x 6mm notched trowel approx. 3.5kg/m2
– Using a 10mm x 10mm notched trowel approx. 5.0kg/m2

 

Uses / Area of Application
For standard sized tiles (up to 60cm x 60cm) and all porous tiles such as ceramic tiles, ceramic mosaics, baked clay tiles and laterite tiles onto rendered concrete.

 

 

In stock

Quantity:

SKU: dbd7788b94d9 Categories: , ,
  • Instructions

    MIXING :
    Add one 25 kg bag of DAVCO Standard Tile Adhesive to approximately 5 to 6 liters of clean water, mixing continuously until a lump-free, creamy consistency is achieved.

    APPLICATION:
    Allow the mix to stand for 3-5 minutes; remix then use the adhesive. Spread the adhesive onto the substrate using either a 6mm x 6mm notched trowel for wall tiling, or a 10mm x 10mm notched trowel for floor tiling. The choice of trowel should be determined by the size of the tiles, depth of knobs, grooves or ridges on the back of the tile, and the evenness of the substrate.
    • A 6mm x 6mm notched trowel is recommended for the mosaic tiles.
    • Thicker bed adhesive allow for better contact to the substrate as well as picking up unevenness especially in the case of slates.
    • For tiles with deep grooves or ridges, such as slate or lugged backed tiles, the adhesive should be butter coated onto the back of the tiles in addition to being notched-trowelled onto the substrate.
    • Do not spread more than 1 m2 of adhesive at a time. Ensure that the adhesive is wet when the tiles are laid and tapped into position to ensure positive contact with the adhesive.
    • Ensure that there are no voids under the tiles.
    • Do not allow the adhesive to skin over prior to tiling.
    • Allow the mix to stand for 5-10 minutes; remix then use the adhesive.
    • Install tiles within the duration of the open time.
    • Do not disturb or walk-on tiles until they are laid for 24 hours.

  • Packaging Dimensions

    45cm x 30cm x 10cm

You may also like