1
Add to Quote

Explore our collections and click on “Add to Quote.” To proceed, you will need to create an account and submit your business documents for verification.

2
Confirmation & Payment

Shop from Monday to Saturday, and you can expect the Quotation withiN 24 hours. Once everything is confirmed, you can conveniently make your payment online. Please note that the quotation is only valid for 2 DAYS.

3
Next-Day Dispatch

Your order will be promptly shipped from either our Manila or Pangasinan warehouse, depending on which location offers you the best savings on shipping costs.

KNAUF PREMIUM PREMIXED PUTTY

Knauf Premium Premixed Putty, also known as Boral Premix Putty, is an air-drying, lightweight jointing compound for all three coat applications or as a finishing coat for gypsum board joints, angles, and fastener heads.

Gypsum Jointing Compound – Putty

 

Packging: in 4 x 5.4kg gallon per box and 28kg pail

Skimming Coverage per 28kg pail: 33sqm based on 1mm thickness

 

 

Clear
SKU: N/A Categories: , ,
  • Instructions

    Mixing Instruction
    • Always use clean tools.
    • Do not mix with residues of previously used compounds.
    • The inclusion of such materials will impair the performance of this
    product and will void the product warranty.
    • USG Boral Premium Premix may appear thick in pail. Before adding
    water. Lightly mix & test its application; if required. Add water to achieve
    desired consistency.
    • Caution: Avoid over-thinning when adding water as this may cause
    cracking and excessive shrinkage.
    • If liquid has separated from the compound, stir carefully to restore consistency.
    • Caution: Do not overmix; overmixing can introduce air bubbles. which
    can create surface imperfections.

    Application Instruction
    • Surfaces must be clean and free from dust.
    • USG Boral Premium Premix may have high viscosity in the pail; it may be
    diluted to a workable viscosity by adding water followed by mechanical mixing.
    • Can be applied by hand or mechanical tools.
    • When using USG Boral Premium Premix for all three coats, the first coat
    must be used to bed a high-quality paper tape.
    Directions – Jointing and Finishing
    First Coat (150mm wide)
    1. Cover joint with a thin layer of compound and embed paper tape. Leaving
    at least 1mm of compound under feathered edge. Let dry and sand lightly.
    Second Coat (200mm wide)
    2. Apply second coat, feathering approximately 50mm beyond first coat.
    Let dry and sand lightly.
    Third Coat (275mm wide)
    3. Apply third coat. Feathering 75mm beyond second coat. Let dry and
    sand lightly. Finish fastener heads. Corner beads and inside corners as
    required with at least three coats of joint compound, feathered out onto
    panel faces and finished to a smooth surface.
    4. USG Boral Premium Premix compound must be allowed to dry thoroughly
    (up to 24 hours depending on temperature and humidity) before re-coating
    or sanding.
    5. Only apply over setting type compounds that have been allowed to dry
    thoroughly.
    6. Sand with care using 180 to 220 grit sandpaper.
    7. Thoroughly clean all tools and equipment after use.

    NOTE: All surfaces including applied joint compound require light sanding
    before painting.

You may also like